How to Paint a Bike

Co-authored by Patrick Coye and Kyle Hall

Last Updated: March 23, 2024 Approved

If the paint on a bike is old or chipped, painting over it with a few fresh coats of paint is a great way to give it a brand-new, glossy look. Fortunately, you don’t have to pay a professional to retouch a bike for you. With the right tools and some time on your hands, you can paint a bike that will turn out looking polished and custom made.

Things You Should Know

Separate the frame from the rest of the bike. Then, wipe down residue left on the bike and sand with 120-grit sandpaper.
Loop a wire or rope through the bike's head tube and hang your bike from a tree or outdoor banister.
Paint your bike, holding the can from 1 foot (0.3 m) away. Wait a half hour before applying another coat and continue the process until you're done.

Part 1

Part 1 of 3:

Disassembling and Prepping the Bike

Download Article

1
Disassemble your bike until you’re left with just the frame. Remove both wheels, the left and right cranks, the bottom bracket, the front and rear derailleurs, the chain, the brakes, the handlebars, the seat, and the front forks. If you have any attachments on your bike, like a water bottle holder, take the screws off from those too.^{[1]
X
Research source}
- Put the screws and tiny parts from the bike in labeled plastic baggies so it’s easier to reassemble it later.
2
Remove any labels or decals from the bike frame. You might have a hard time taking them off if they’re old and really stuck on there. If they won’t peel off, use a blow dryer or heat gun to warm them up. The adhesive on the labels will loosen when it’s warmed, making it easier to remove the labels from the frame.^{[2]
X
Research source}
- If you’re having trouble peeling a label off with your fingers, use a putty knife to lift the edges of the label up off the frame.^{[3]
  X
  Research source}
Advertisement
If there’s any glue residue left over from the decals, spray a product like WD-40 on the frame and wipe off the residue with a cloth.
4
Sand the frame of the bike so the new coat of paint is able to stick. If the frame has a thick or glossy paint on it, use a low-grit (rough) sandpaper to remove a lot of the old paint. If the frame has a matte paint on it or it’s completely bare, use a high-grit (fine) sandpaper.
- Use wire brushes, low grit sandpaper, maybe between 80 to 120 grit sandpaper to prepare the surface.^{[4]
  X
  Research source}
- You can also use a scraper. Generally, a 5-in-1 painter's tool is very helpful.^{[5]
  X
  Research source}
Use a cloth with soapy water.^{[6]
X
Research source}
6
Apply painter’s tape to the areas of the frame you don’t want to be painted. There are a few parts of the frame that should be left paint-free:^{[7]
X
Research source}
- The posts for the brakes.
- Any bearing surfaces.
- Any threads on the bike where something will need to be screwed in when you reassemble it.

Part 2

Part 2 of 3:

Hanging or Mounting the Frame

Download Article

If you can’t work outside, make sure you set up in a well-ventilated area, like a garage with the garage door open. Lay a tarp or newspaper on the ground to catch any paint that drips. You’ll also want to have a pair of safety goggles and a dust mask on hand.
If you’re painting outside, look for something to hang the wire or rope from, like a tree branch or a rafter on a covered porch. If you’re working inside, hang the wire or rope from the ceiling. The goal is to hang the frame in a location where you can easily walk around it and paint every side.
3
Mount the frame on a table if you can’t hang it. Put a broomstick or dowel through the head tube and clamp it onto a table so that the frame is securely elevated in the air off to one of the sides of the table.^{[8]
X
Research source}
- If you don’t have a table, you can mount the frame on a desk, stand, or other structure that will hold the bike off the ground.

Part 3

Part 3 of 3:

Painting and Reassembling the Bike

Download Article

1
Use a high-quality spray paint to paint the frame. Look online or in your local hardware store for spray paint that is specifically made for use on metal. Avoid generic brands that will leave the coat on the frame looking uneven.
- Never combine different brands of spray paint. The different paints might react badly with each other.^{[9]
  X
  Research source}
- If you want the bike frame to look matte instead of glossy, look for spray paint that says “matte finish” on the can.
2
Spray paint the first coat on the bike frame. Hold the can of spray paint around 1 foot (0.3 m) (30.48 cm) away from the frame while you’re spraying it, and keep the can in constant motion. Avoid spraying continuously in one area, or you will end up with drip marks. Make your way around the entire frame until the whole surface has been covered with paint.^{[10]
X
Research source}
- Don’t worry if you still see some of the old paint showing through the first coat. You want to do several thin coats as opposed to one thick coat, so the old paint will be covered up after you apply more coats later on.
Once the first coat is completely dry, repeat the spray-painting process, making sure you get another thin, even coat on the frame.
Always wait 15-30 minutes in between coats. The amount of coats you need will depend on the color and type of spray paint you use. When you can’t see the old paint or metal on the frame, and the new paint looks even, you’ve applied enough coats of paint.
5
Apply a clear coat to protect the bike from rust and keep it looking new. Wait a few hours after spray painting before you apply the clear coat. Once the frame is completely dry, spray an even layer of clear coat all over the bike, similarly to how you applied the spray paint.
- For the best results, apply three coats of clear coat. Let each coat dry for 15-30 minutes before you apply the next one.
- Alternatively, you can use an oxidizing primer made specifically for the metal at the beginning. It will prevent the growth of rust in the future.^{[11]
  X
  Research source}
Avoid touching or moving the bike during this period. If you painted outside, check the weather forecast and carefully move the bike inside if it’s going to rain or snow. Once it’s completely dry, go ahead and remove any painter’s tape you put on it during the prepping stages.
Reassemble the bike. Put back on all of the parts you detached from the frame earlier, including the wheels, the bottom bracket, the chain, the left and right cranks, the front and rear derailleurs, the handlebars, the brakes, the seat, and the front forks. Now you’re ready to try out your brand-new looking bike!

Community Q&A

Search

Add New Question

Question

Do I need to use a primer before painting a bike?

Alonzo V

Community Answer

Without primer, your paint will chip and peel off. The primer bonds the top coat of the bare metal for long-lasting results. I highly recommend using a primer.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 33 Helpful 157
Question

What brand of primer, paint, and lacquer do you recommend?

Community Answer

Rustoleum is a good brand, but you can also find other quality paints at your local hardware store.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 35 Helpful 83
Question

Can I apply clear coat paint on the old paint of my bike without sand?

Community Answer

No, the new paint won't stick. Sand down the old paint and spray again.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 15 Helpful 33

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If you’re having trouble sanding down the old layers of paint, try using a paint-removing solution to speed up the process.

Thanks
Helpful 1 Not Helpful 0
Use a professional-grade spray paint for the best results.

Thanks
Helpful 1 Not Helpful 0